Yakima's RidgeBack 2 securely transports two bikes with Yakima's cradles and their simple-to-adjust, ratcheting ZipStrips. Constructed of lightweight aluminum, this innovative hitch rack comes fully assembled out of the box for ease of use. Just plug it into the hitch, tighten and lock the SpeedKnob, and you're ready to load up the bikes! In addition to carrying traditional double-diamond frames with zero bike-to-bike contact, the anti-sway cradles are specially shaped to be compatible with non-standard and full-suspension frames. Plus, the Upperhand control lever allows the rack to fold down, away from back of your vehicle, for unimpeded trunk/hatch access, or when not in use, lets the RidgeBack fold flat for storage.
Load up your bikes in no time flat with Yakima's QuickBack rack. An integrated adjustment knob lets you effortlessly adjust arm angles to perfectly transport two bikes. And, with its labeled strap system, it's very easy to use. Yakima's Tri-Padded feet, coated metal buckles are very durable and maintain your vehicle’s pristine paint job. Your bikes are protected, too, as a result of Yakima's SwitchBlade anti-sway cradles that eliminate bike-to-bike contact. A steel-reinforced strap that goes into the trunk provides a little security, and the whole rack folds down when not in use via a single knob.
Secure your bikes with Saris' Kool Rack 2-Bike. Hydraulic pressure holds the rack in place while valve limits protect your truck bed walls. Its pivoting rubber pads grip most surfaces, including bedliners. No drilling is required. The Kool Rack comes with two fork mounts—additional mounts can be added (sold separately). Besides holding bikes, the Kool Rack can be used to secure cargo from sliding around the pick-up bed.
$39.99 - $50.00
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
The SuperJoe 3 is the superhero of trunk-mount racks, delivering knockout ease of installation and stability at a heroic price. It easily carries three bikes and goes on and comes off in a heartbeat thanks to Yakima's Quick Trigger Hub System. Plus, six straps quickly secure the rack to the trunk and the Stable Cradles hold bikes securely in place. The SuperJoe 3 fits a wide range of vehicles including sedans, mini-vans and hatchbacks, too.
Yakima's Control Towers are the rock-solid foundation for your Yakima roof rack (for vehicles with factory track systems). The Control Towers attach to your factory track system with Yakima's vehicle-specific landing pads and they have die-cast components for a sturdy hold.
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.
Yakima's RidgeBack 4 securely transports four bikes with Yakima's cradles and their simple-to-adjust, ratcheting ZipStrips. Constructed of lightweight aluminum, this innovative hitch rack comes fully assembled out of the box for ease of use. Just plug it into the hitch, tighten and lock the SpeedKnob, and you're ready to load up the bikes! In addition to carrying traditional double-diamond frames with zero bike-to-bike contact, the anti-sway cradles are specially shaped to be compatible with non-standard and full-suspension frames. Plus, the Upperhand control lever allows the rack to fold down, away from back of your vehicle, for unimpeded trunk/hatch access, or when not in use, lets the RidgeBack fold flat for storage.
Rubber straps used to secure bikes to Yakima hitch and strap racks manufactured prior to 2004. Each strap has 5 holes which are 3/4" in diameter. Since 2004 we have used rubber straps called Chain Straps, which each have 8 holes that are 1/2" in diameter.
Sunlite's versatile Bike Block Quick Release Fork Mount is a handy bike mount that you can install in your vehicle, pickup truck bed or on virtually any flat surface. It features a sturdy 9mm-diameter quick release to securely support your 2-wheeler by its fork. And, the Bike Block is made of heavy-duty metal for strength and reliability. Plus, it features a pass-through hole for locking your rig with a cable lock, too.
There's no need to shout in the car anymore! Yakima's Windjammer snaps over your front Yakima crossbar in seconds and smoothes the airflow, cutting down on roof-rack wind noise.
Let your friends enjoy the trip, because loading and unloading with the BoatLoader could not be easier. The telescoping load-assist arm lets you load your boat while protecting your vehicle and your boat, and retracts into your Yakima crossbar when not in use. - Telescoping boat load-assist arm retracts into your Yakima crossbar - Protects kayaks, canoes and your car from dings, scratches and dents - Corrosion-resistant - Fits Yakima round crossbars only - Extends 28 inches\u001D from end of bar
The RockyMounts SwitchHitter is the most versatile fork-mounted bike carrier ever created. It fits ALL styles of crossbars out of the box (T-Track hardware included for slotted bars), 9mm QR bikes, and thru-axle bikes (12x100, 15x100, "Boost" 15x110). It also features integrated, magnetized cable lock pulls out of the rear of the tray (lock cores not included–a 2-pack is recommended). Features - Fits Yakima round, Thule square, factory/aero, and slotted bars (with T-Track hardware) like RockyMounts Ouray, Thule AeroBlade, Yakima Whispbar, Yakima StreamLine, and Rhino Rack crossbars - Includes 12x100 axle, 15x100 axle, "Boost" 15x110 axle, and 9mm QR.
Yakima's TubeTop solves the dilemma of how to carry bikes that have frames with non-traditional top tubes, such as certain suspension bikes, women's frames, children's bikes and more. The fully adjustable TubeTop is attached to the bike to act as a frame top tube so the bike will mount on all Yakima rear racks. Plus, the TubeTop's large molded collars are gentle on stems and seatposts.
Saris' Bike Porter Hitch makes bike transportation effortless. The durable T-design steel frame hauls two bikes of up to 35 pounds each and fits both standard hitch sizes. Ratcheting anti–sway straps secure and stabilize your bikes, while grooved rubber cradles separate the bike's shift and brake cables from the frame. The rack folds down to the ground so you can access the back hatch of your car, plus the top bar folds down out of the way when not in use.
Yakima's Q-Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The Q-Towers automatically adjust to fit your vehicle's roof contours and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.
Got a minute? That's about the time it takes to install Yakima's BeddyJo in your truck. This innovative pickup-bed rack uses WonderWedges for quick, sturdy installation without drilling. With soft foam pads protecting your truck bed, you can carry two bikes securely on this corrosion-resistant, heavy-duty steel rack. One size fits compact to full-size beds, and BeddyJo works with or without bed liners.
Yakima's HandCuff keeps your bikes secure when attached to the SwingDaddy and RidgeBack (both sold separately). Plus, there's a universal key and an additional SKS Lock Core so you can have the same key that locks your bikes to the rack and your rack to the hitch.
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 2 SKS Cores and matching keys - 2 keys included plus a control key
A strap rack that hits the sweet spot where functionality, durability, simplicity and good looks come together, the HalfBack 3 is designed for riders who like to grab their bikes and go. Install is simple, loading and unloading is a piece of cake, bikes ride securely, and a built-in bottle opener opens bottles. - SuperCush ZipStrip cradles secure the bikes and make loading and unloading a breeze - ZipStrips secure bikes to the rack and are fully removable - Modern design delivers an improved fit and looks awesome - Bomber external frame holds tough, cushy padding protects your paint - Simple installation with an interlocking HUB that aligns key adjustment points - Four-strap attachment is intuitive and easy - Compact for easy storage - Yakima signature bottle opener lets you enjoy a post-ride cold one - Number of Bikes: 3 TECHNICAL SPECS - Weight: 22.00 lbs - Dimensions: L 30.00” x W 29.00” x H 22.00”
Yakima's SuperJoe Pro is one handy trunk rack. Available in 2- and 3-bike versions, it fits most vehicles in a snap thanks to its six easy-to-adjust straps with padded buckles. It even has cushioned feet that stabilize the rack and protect your car. For lightning-fast installation/removal, the SuperJoe Pro utilizes Yakima's QuickTrigger system that allows for simple, precise adjustments so you can get a perfect fit on your vehicle. What's more, its narrow-set arms with StableCradles let you carry nearly any style of bicycle for the ultimate in traveling convenience!
Yakima's Glass Hatch Hook is an alternative strap for "Joe" series racks used on cars where standard hooks cannot be used.
Yakima's DeadLock protects you in two important ways: first, it locks the outside bike to the rack with a cable and steel pin so all your bikes are safe and secure. Second, it locks the hitch-mounted rack to the vehicle so the rack can't get stolen, either. Plus, there's a universal key so you can easily unlock your bikes and rack as needed.
Yakima's 1 1/4-Inch Hitch Adapter makes a 2-inch hitch bike carrier compatible with 1 1/4-inch hitch receivers.
Allen's Deluxe 4-Bike Carrier Trunk Rack quickly and easily attaches to your vehicle to carry up to 4 bicycles. Two 21-inch arms with stable and protective cradles safely support and secure your precious two-wheel cargo and hold them safely away from your vehicle. Plus, the fully-assembled Deluxe fits most sedans, hatchbacks, minivans and SUVs.
If you have a trunk or rear rack and a bike with an unconventional frame (such as a full-suspension or ladies bike), you probably need Sunlite's Crossbar Adapter. Vinyl-coated hooks on either end hold your bike and act as a "top tube" for easy transportation. In the middle, a quick-release telescoping adjustment ensures the Crossbar Adapter will fit almost any bike.
Say hello to the SUPPup—a faithful companion with soft padding to hug your board, self adjusting slider for varying board widths, and straps that stow away for travel. - Fully assembled out of the box - Fits Yakima round, square, factory and aerodynamic crossbars - Integrated strap management stows strap ends for travel - Soft padding cradles your board - Slider adjusts to boards up to 36" wide - Includes everything needed to carry up to 2 SUP boards - Minimum crossbar spread of 24” or more
Getting your gear onto your rack isnt complete until youve secured it. This pair of super strong box-stitched 16 straps include soft, rubber-coated buckles to protect your boats and gear from scratches.
Yakima's Spare Joe 2 mounts to your vehicle's spare tire and holds two bikes. Anti-sway cradles hold the bikes securely ensuring they can't bump into each other. Plus, this nifty rack can be offset to allow your bikes to be more centered behind the vehicle, and the arms fold down when not in use, for easy storage, too.
Page 1 of 1